It is true that fishing rods can have a high cost, and for many fishermen, it may be impossible to acquire them. Thinking of you and your budget, we want to show you how to fish with pvc pipes
As you can imagine, the first thing is to make your own fishing rod, here we will leave you a simple step by step.
How to fish with PVC pipes
Do you want to know how to fish with PVC pipes? Look for your work tools now, because you will learn how to make your own fishing rod. Let's do it!
- You will need two PVC pipes, one ½ and one ¾ in diameter. With a saw, cut the tubes to the desired length, remember that this will be the size of your new fishing rod. With a sandpaper, smooth the sawn edges and remove the marks on the body of the tubes
- Look for ½ and ¾ tube caps and connectors of the same hose, female and male. Place each of the caps and connectors on the corresponding piece of tube but do not add glue
- Using a 2/32mm drill bit, drill 3-5 holes through the entire ½ PVC pipe. The number of holes depends on the length of the tube, and they must be equidistant
- According to the number of holes, you must add the grommets. You can use paper clips, for this you must remove the silver wire from the clip. Take the wire and fit the legs into the holes in the tube on each side to form the eyelet.
- Make a fishing reel and add it to the larger tube. With the same bit, you can open two holes on the sides of the tube and screw on the fishing reel
- To finish, screw the PVC pipes together to shape the fishing rod and run the line through the grommets. At the end of the line, add a hook, sinker, and float
Are you ready to go fishing! You just have to cast the hook safely, and take the spool of fishing line to prevent it from going completely. If you catch a good catch, wind the fishing line through the spool and you're done.
